spring-loaded connectors & pad connectors series 8mm 8mm-11-00nn-02-131 single row 2.54 mm, surface mount parallel pad connectors with fixed contacts, counterparts for spring- loaded connectors technical specs.: insulator black glass filled polyester pct-gf30-fr flammability ul 94v-o contact brass cuzn36pb3 (c36000) contacting area ? 1.5 mm max operating current 3.5 a dielectric strength min. 1000 v rms coplanarity smd terminations max. 0.1 mm (measured on 25 mm long connectors) ordering information: plating code terminaison contacting area 11 gold 0.25 m gold 0.25 m preci-dip sa rue saint-henri 11 p.p.box 834 ch-2800 delmont / switzerland phone +41 (0)32 421 04 00 fax +41 (0)32 421 04 01 e-mail sales@precidip.com www.precidip.com
technical assistance general specifications: the values listed below are general specs applying for preci-dip spring-loaded connectors. please see individual catalog page for additional and product specific technical data. operating temperature range -55 ... +125 c climatic category (iec) 55/85/21 operating humidity range annual mean 75 % max working voltage 100 vrms/150 vdc (2.54 mm grid) preci-dip products are recognized by underwriters laboratories inc. and listed under "connectors for use in data, signal, control and power applications", file nr. e174442. electrical characteristics: insulation resistance between any two adjacent contacts min. 10'000 m at 500 v ac capacitance between any two adjacent contacts max. 1 pf environmental characteristics: the sockets withstand the following environmental tests without mechanical and electrical defects: - dry heat steady state iec 60512-11-9.11i / 60068-2-2.bb: 125 c, 16h - damp heat cyclic iec 60512-11-12.11m / 60068-2-30.db: 25/55 c, 90 ? 100 %rh, 1 cycle of 24 h - cold steady state iec 60512-11-10.11j / 60068-2-1.a: -55 c, 2 h - thermal shock iec 60512-11-4.11d / 60068-2-14.na: -55/125 c, 5 cycles 30 min - sinusoidal vibrations iec 60512-6-4.6d / 60068-2-6.fc: 10 to 500 hz, 10 g, 1 octave/min, 10 cycles for each axis - shock iec 60512-6-3.6c / 60068-2-27.ea: 50 g, 11 ms, 3 shocks in three axis during the above two tests no contact interruption >50 ns does appear. - solderability j-std-002a, test a, 245c, 5 s solder alloy snag3.8cu0.7 - resistance to soldering heat j-std-0020c, 260c, 20 s - moisture sensitivity j-std-020c level 1 - resistance to corrosion : 1) salt spray test iec 60068-2-11.ka: 48 h 2) sulfur dioxide (so2) test iec 60068-2-42 kc: 96 h at 25 ppm so2, 25 c, 75 %rh 3) hydrogen sulfide (h2s) test iec 60068-2-43 kd: 96 h at 12 ppm h2s, 25 c, 75 %rh packaging: standard connector packaging is card box. smd mount connectors available on request with tape & reel packaging acc. to eia standard 481. preci-dip sa rue saint-henri 11 p.p.box 834 ch-2800 delmont / switzerland phone +41 (0)32 421 04 00 fax +41 (0)32 421 04 01 e-mail sales@precidip.com www.precidip.com
|
